According to Tool Box topics, so much time is lost and so many injuries are reported every year while working near cranes, hoists and other machines. Fortunately, using cameras on cranes is becoming more and more common. These cameras make it possible for the operator to see areas where his eyes cannot. There are numerous benefits of using cameras on cranes during any construction project among them being:
· Enhanced safety
Most construction sites have blind spots which can be dangerous for anyone around the site. Luckily, cameras on cranes stay with the load at all times giving the operator a better view of the site and load. Whether the load moves to an area with dim light or is blocked by construction or buildings, the camera makes it possible for the operator to travel with the load. He only needs to glance at a monitor in his cab to see where the load is at all times.
· Saves time
Cameras on cranes save a lot of time that is needed during every lift. A blind spot not only poses danger but also takes up a lot of time as the crane operator and rigger try to communicate whether the load has been lifted correctly or not. All this can be changed by using cameras on cranes.
· Saves money
Cameras on cranes make miscommunication less likely which can lead to accidents worth millions of dollars.
All the above benefits are important but the top reason for using HoistCam’s cameras on cranes is the enhanced security to every job. Besides the use of cameras on cranes, here are a few safety tips for crane and hoist to help prevent accidents.
· Pay attention to all warning signs from the overhead hoisting machine.
· Never stand or walk under a moving or stationary load.
· Always warn others of approaching or moving overhead loads.
· Never distract operators of overhead machines while performing their jobs.
· Read and obey all the warning signs put up on a construction site especially those in the critical areas.
Safety rules for signal persons, operators and hookup crews.
· Ensure that the equipment you are about to operate has been inspected and is certified for operation.
· Perform an operation inspection of the machine
· Ensure the warning signals are working properly.
· Never operate an unsafe crane
· Check the brakes and all the controls prior to starting the work.
· Never allow an unauthorized person to operate the crane or even give signals.
· Ensure that the signal person and operator are in clear view or can communicate by phone.
· No one should ride on the hooks or load.
· Always use the warning signs when required.
· Do not carry a load over workers
· Never carry a load that appears to be slung improperly.
· When repairing or adjusting the machine, always lock the control in an off position.
Looking at the above safety tips, it is clear that HoistCam’s cameras on cranes greatly enhance the safety of a site. While all the aforementioned tips should be followed, the ability to see each step of the load and monitor it closely will significantly improve the chances of a safe working environment.
Having cameras on cranes will alert the managers and operators of any problems faster giving them time to rid of it which will in turn make everyone feel safe.